|
|
|
home sitemap contact us
  TennMax America / Products / Environmental Seal Gasket

PFcan
(Pressure Formed Cover)

Pcan
(Pressure Gasketing Cover)
PVD-Precision

Clamshell
(Base Station Filter & Clamshell Cover)

PVD-Shield
Silicone Gasket
 
       
 

/// Environmental Seal

 
       
  Characteristics  
 

TennVacˇ¦s Environmental Seal material is designed as a water and environmental sealed Form-In-Place gasket. It is not electrical conductive but provides extremely resilient elastic gasket with good adhesion on general plastics and metals.
It is a two component, heat curable Silicone system, optimized for Form-In-Place process.
 
   
 
 
  Features  
 
- Short curing cycle, within one hour, to meet high production rate products
- No leaking of silicone oil under high temperature/pressure
- Very elastic rubber property, low compression force
 
   
 
 
  Applications  
 
- Base Station
- Telecommunication devices
 
   
 
 
  Typical Properties  
 
Properites
Unit
F-6002
F-6003
F-6031
Elastomer Binder
Silicone
Silicone
Silicone foam
Conductive Filler
None
None
None
Physical Properties
Specific Gravity
g/cm3
1.2
1.05
0.46
Hardness
Shore A
27
50
22
Tensile Strength
PSI
300
450
198.7
Elongation
%
200
450
>100
Tear Strength
lb/in
60
100
---
Compression Set
%
50
50
>50
Color
Hazy Red
Black
Black
Temperature Range
degree C
-45 ~ 150
-45 ~ 150
-50~ 150
Max. using Temp.
degree C
200
200
200
Electrical Properties
Volume Resistivity
Ohm-cm
1 x 10^12
1 x 10^12
1 x 10^12
 
 
 
 
 
     
   
 
 
   
 
Copyright 2004 c TennMax America Inc. All Rights Reserved
TEL:(360) 546-3824 FAX:(360) 567-0706 Email:jeff@tennmaxusa.com ADD:14413 NE 10th Ave., Suite A103, Vancouver, WA 98685 USA .